The NPD's Fact-pages
	Generated 10.02.2012

After more than 10 years as a fact provider NPDs FactPages version 1 will be shut down in Dec. 2011. Start using FactPages version 2 now! See also FactPages version 2 Quick Reference' If you have any questions or comments please send an e-mail to FactWEB@npd.no.

Exploration wellbore: 6407/9-2

General information

Wellbore history

General

Appraisal well 6407/9-2 was the second well in the Northern part of the Draugen Discovery on the Haltenbanken. The main objectives of the appraisal were to improve estimation of oil in place; to evaluate the reservoir quality and sand development on the Northern flank of the structure; calibration of the seismic time pick and velocity model; and to evaluate the oil deliverability and water injection characteristics.

Operations and results

Appraisal well 6407/9-2 was spudded with the semi-submersible installation Borgny Dolphin on 18 November 1984 and drilled to TD at 1865 m in the Early Jurassic Tilje Formation. The well was drilled with seawater and bentonite down to 813.5 m and with KCl/Polymer mud from 813.5 m to TD. No shallow gas was encountered.

The Rogn Formation came in twenty m below prognosed depth at 1650 m. It consisted of an overall coarsening upwards sand sequence and contained an oil column of 12.5 m down to an oi1/ water contact at 1663.5 m. The calculated porosity was fairly constant throughout the reservoir at approximately 27%, while measured permeability decreased from up to 5 Darcy in the oil-bearing interval down to 20 mD towards the base of the reservoir. Eight conventional cores were cut from 1638 m to 1706.5 m. Several runs were made with the RFT: the reservoir pressure measured was hydrostatic, 2392 psia at 1625 m. No down hole fluid sample was recovered due to repeated plugging of the sampling probe.

The well was permanently abandoned on 2 February as an oil appraisal

Testing

Two DST tests were performed. The water zone was perforated from 1670 to 1675.5 m. An eight hours water injection test at rates up to 8000 b/d did not reveal any immediate problems related to injection of unfiltered clean seawater. After the water zone test the oil zone was perforated from 1651 to 1657 m. The well was gravel packed and rates up to 1177 Sm3/day (7400 stb/d) of 40 deg API oil were achieved. The evaluation showed a permeability of 2.6 Darcy. The reservoir temperature was 67 deg C.

Cuttings available at the NPD

Interval [m]: 360.00 - 1866.00

Cores available at the NPD

Core length [m]: 40.60

Scanned core photos

1638-1639m	1640-1641m	1653-1659m	1659-1665m	1665-1670m
1671-1677m	1677-1680m	1684-1686m	1688-1693m	1702-1706m

Palynological slides available at the NPD

Oil samples available at the NPD

Casing and leak-off tests

Mud

Drill stem test (intervals and pressures)

Drill Stem Test (recovery)

Available logs

Lithostratigraphy

Composite log

No composite log presently available.

Geochemical information

You need an ACROBAT reader from ADOBE  to display the reports in pdf format.

Documents reported by the licencees (period for duty of secrecy expired)

You need an ACROBAT reader from ADOBE  to display the reports in pdf format.

Old NPD WDSS reports, NPD papers and other related documents

You need an ACROBAT reader from ADOBE  to display the reports in pdf format.