Text size adjustment
Hold down the Ctrl key (PC) or Cmd key (MAC) and press "+" to enlarge or "-" to reduce the text size.
Profile: All yearly or monthly data under one heading (i.e. column) in the spreadsheet is a Profile.
Profile collection: All data in the spreadsheets, Profil_1, Profil_2 etc. are a Profile collection.
Time horizon: The operator should report complete profiles for the projects, assumed profitable operations beyond the expiry of the license. Relevant columns for costs and emissions, as a result of the production, shall be filled inn. If profitability is dependent on other projects, e.g. when reporting an uneconomic tail production, this should be stated in a comment for this project.
Norwegian part: If the ownership of a field or discovery is shared with another country, only the Norwegian part shall be reported in the profiles, except for environmental data which shall be reported 100 % if the emissions take place in Norway.
NOK-values: Costs and income for the previous calendar year shall be reported in actual NOK values for that year. No price increase/decrease calculation shall be made on cost numbers for previous years. All future costs and income shall be reported in real NOK. Year of reference for real NOK shall be current calendar year.
Costs: To the extent possible, reported operating costs should be distributed among the various cost components and correspond with the operating period. For projects in RC 0-3, the RNB reporting should be in accordance with the proposed license budget per 1.10. Any discrepancies between reported estimate and the operator’s proposed investment budget shall be commented in cell AE28 in the relevant profile sheets.
For fields, discoveries and TUF in RC 0, 0+1, 1, 2, 3, 4 and 5, data on a yearly basis should be reported.
Monthly sales quantities for 2019 for actual profiles shall be reported in a separate spreadsheet, see chapter 8 – Completion of the spreadsheet “Månedsdata”.
Types of data included in the profile collections:
The scope of the reporting depends on the type of project (field versus pipeline/land facility) and resource class.
There is an area under each profile collection for consistency check of data entered in the profile collection, see chapter 9.2 Consistency checks.
Each profile collection includes comment boxes placed above the production and sales data, investment data, operating costs and environmental data. These boxes shall be used to provide brief information about the profiles. If gas is bought for injection, please state the source field in the information cell “Please name sources of gas purchase”.
Furthermore, the comment boxes are to be filled in if there are significant changes compared with the previous RNB reporting, such as:
The comment boxes can be used to explain large variations in the series of number reported this year. For projects that are reported with operating costs in basis profile, the comment box in this profile sheet is used to explain nonconformities. For other projects, the nonconformity explanation is provided in the comment box in the profile sheet, ref. chapter 6.6.
The table at the top of each profile sheet must be completed with information about the projects included in the profile collection; project name, resource class and serial number as specified in the project lists. Recoverable volumes shall be stated with uncertainty. Fields and discoveries shall specify which deposit the recovery comes from. The drop-down lists retrieve information from Table 2a in the spreadsheet “Generell info og kommentarer”.
The main project should always be reported in Profil_1. Further profile sheets should be used according to maturation and dependencies. For example, a project depending on implementation of another project should be reported in a profile sheet with a higher number. Note that the resource class is independent on the numbering of profile sheets.
In each profile sheets, multiple projects with the same resource class can be included. The projects reported in the same sheet should have a common project type and decision timeline. Larger projects, where PDO or an application for PDO exemption will be delivered, must be reported in a separate profile sheet. Furthermore, the projects in the resource classes 3, 4 and 5 require information ("prosjektattributter") about the projects, this is described in chapter 6.9 Project Attributes.
This chapter includes a description of the reporting of liquid and gas profiles. Please note the following:
The profiles under the heading "Production and injection data" relate to volumes that are produced and injected in the deposits in the same field, not injection in other fields.
The following profiles are to be reported:
For oil, annual base (expected) estimates must be reported with uncertainty estimates if the project is in RC (0+1) - 4. For NGL and condensate, only annual base (expected) estimates are to be reported.
The high and low estimates must describe the sample space for the relevant calendar year including both general reservoir uncertainty and operational uncertainty. Operational uncertainty shall reflect the progress in well drilling, the productivity of the wells, production capacity in processing facilities, etc.
The total of low estimates for annual production will normally be lower than the low estimate for the resource estimate (chapter 6.2), as uncertainty in annual volume shall include uncertainties that are not correlated from year to year (for example regularity). It is also improbable that the low estimate will occur all years. Correspondingly, the total of annual high estimates will normally be higher than the high estimate in the resource overview.
Annual low and high estimates shall have the same start-up year as the basis profile. The uncertainty in the start-up date is reported in a separate space on the spreadsheet directly above the profiles, by stating an early, expected and late date.
Transport and sale of gas shall be reported independently of the given production permit. If the expectation is higher than the production permit, this must be stated.
Note that some of the gas data is to be reported according to calendar year (1 January – 31 December) while other data is to be reported according to gas year. The gas year n runs from 1 October in year n to 1 October in year n+1. If it is difficult to convert between gas year and calendar year, please contact the NPD.
We are cooperating with Gassco on reporting. Therefore, copies of the forms that operators use to report to the GMDC are included in the reporting file. The RNB data is transferred into the "Gassco form" with the aid of formulas. Operators shall also send the "Gassco forms" to Gassco, in accordance with a separate order from Gassco.
The profile in column W (Physical dry gas delivery) shall be completed for all fields and discoveries that physically deliver gas. Fields that deliver rich gas shall report the expected volumes of dry gas at sales point after processing. For fields transporting unstable liquids ashore, the profile W shall not contain dry gas that is separated from the liquids at the terminal.
The data (column W) shall be reported with gross calorific value per gas year. This profile (W) is also used in the enclosed Gassco forms in the RNB file. For fields/discoveries that are expected to deliver dry gas to Gassled, the gas is reported to Gassled Area D (dry gas) (”Entry point” = Gassco Area D). All gas that the licensees may seek transport rights for in Gassled, shall be included in the Gassco part of the reporting.
The profile in column X (Physical rich gas delivery) shall be completed for fields/discoveries that are expected to deliver rich gas. The profile is stated per gas year with actual gross calorific value at the sales point. The profile is also used in the enclosed Gassco forms in the RNB file. Fields that export rich gas to another field for processing before further transport as dry gas, is not required to report rich gas in column X.
For fields/discoveries that are expected to deliver rich gas to Gassled, the rich gas (column X) is reported to Gassled Area A (Statpipe), Area B (Åsgard), Area E (Kollsnes), Area K (Haltenpipe), Area L (Utsira High Gas Pipeline) and/or other areas such as the Barents (Gassco: “Entry points”). All gas that the licensees may seek transport rights for in these transport systems or areas, shall be included in the Gassco part of the reporting.
The profile in column Z (saleable gas per gas year) is derived from the profile in column W. For fields transporting unstable liquids ashore this profile (column Z) should also contain dry gas that is separated from the liquids at the terminal and sold.
The profile in column Y (saleable gas per calendar year) is derived from the profile in column Z, only converted into calendar years.
The profile in column AA includes both historical and future expected purchases. Gas received as compensation for services (such as storage, treatment and transport), is not defined as purchase. All physical received gas to the field / discovery (bought, compensation, in kind, etc.) shall be reported in column BY (Receipt of gas), see chapter 6.8.1.
The profile in column U should be identical with the profile "Saleable gas per calendar year 40 MJ/Sm³” in column Y, but stated in gross calorific value. The same principles as for oil are used as a basis (see chapter 6.3.2).
The table below summarize the reporting of different gas types.
Table 6‑1 The reporting of different gas types
Blow-down of gas caps on the fields should be reported in a separate profile collection. This will apply to projects that describe a change in production strategy for gas (compression, blow-down, etc.).
The reason for this is that it is uncertain when these projects will start. It is therefore desirable to receive separate profiles so that this can be taken into account when NPDs aggregated prognoses are prepared.
The consequence is that the blow-down projects included in RC 0 +1, and previously included in the main profile should be reported separately.
For these projects, it is desirable to get gas and associated liquid profiles and investment profiles in a separate profile collection. Operating costs and environmental profiles can still be reported in the main project, unless the project involves new power-generating equipment.
Gas bought from other fields (for injection purposes), which later will be exported, shall not be included in the resource base of the buyer, therefore these volumes should be shown in a separate row in the resource overview with negative numbers. The gas import profile is given in column AA (gas purchase) by the buyer, and the payment is given in column BJ (Cost purchase of gas).
If gas is delivered to another field/discovery for injection or other use, please name the actual field/discovery. If the gas is given away as payment for a service or if the gas is sold, this should be explained in the comment box 2C in the worksheet “Generell info og kommentarer”.
When products are delivered in kind to other fields, the recipient should show the volume in a separate row in the resource overview, if these volumes will be sold.
When commercial agreements involve swaps/borrowing/deferral of volumes between fields, a new “commercial” profile, Profil_15 can be added.
The complexity in reporting of commercial agreements varies, and in some situations sufficient reporting might be possible without the introduction of Profil_15.
Reporting of commercial agreements should apply the following practise:
The Joint Operating Agreement (JOA), which is an appendix to the License Agreement, specify which cost items the licensees are obliged to report in their budgets, work programs etc. The JOA consists of 9 main items with sub-items (and sub-sub-items).
The reporting to the NPD shall mainly be in accordance with the item structure in the JOA.
In some cases, the operators are asked to submit more detailed reporting than what is specified in the JOA. In other cases the operator is requested to report more aggregated data. This applies to both investment costs and operating costs.
For further definition of what is included in “Concept studies”, please refer to the JOA.
Tariff income shall be reported in the spreadsheet “Tariffinntekter” (see chapter 7 for details). Tariffs from this spreadsheet are copied automatically to Profile 1 only.
”Other income” beyond tariff income should be reported directly in column AC under “Other income” in the profile sheets.
«General price increase» is the operator’s general assumption for converting nominal NOK to real NOK. For RNB2019 the reference year is 2018. The “General price increase” should therefore be used to convert nominal figures for 2019 and onwards from nominal value to 2018-value.
Please note that if the general price increase is assumed to be constant with time from 2019 and onwards, this shall be reported as a percentage in the cell AC28 in profile sheet 1 (Profil_1). By definition, we expect the same general price increase (for instance the consumer price index) to be used for all projects reported by the same operator, and we recommend that the price increase percentage value is entered into cell AC28 by a coordinator before internal distribution to the projects. If the general price increase varies, please input the percentages in the “Cost control” spreadsheet range C19:C41, see chapter 9.3.
Investments begin when a decision on implementation of a development project has been made.
Reporting to the RNB regarding investment costs differ on certain items from the structure in the JOA. Joint Operating Agreement.
The table below shows where this is applicable.
Table 6-2 Investment costs
The following table shows the reporting requirements for development and operating investments, ref. Items 5.1, 5.2 and 5.3 of the JOA.
The JOA: ”Development investments concern the development of new resources. There will always be concept studies before such an investment is made. The budget for the project is sanctioned by an approved PDO/PIO. Some projects are exempted from the PDO requirement.”
“Other development investments” is a miscellaneous column that includes all other development investments.
Please control the accordance between type of development investment and development solution reported in the project attribute area for RC 3-5 projects.
The following definitions apply:
Subsea facilities are facilities on the seabed. They are to be reported excluding pipelines.
Floating facilities comprise all facilities that do not rest on the seabed, such as semi-submersible platforms, tension leg platforms (TLP), production ships and other floating facilities. If in doubt, contact the NPD.
Fixed facilities comprise all facilities that are located on the seabed (excluding subsea facilities and pipelines) and that are above sea level. Fixed facilities also include mobile facilities which during the field’s lifetime are regarded as permanent for the field (e.g. jack-up rigs, owned or rented as production facility.)
Pipelines shall comprise investments in the pipeline system. However, investments related to non-pipeline facilities offshore, such as Draupner, should be reported as investments in columns AF to AJ. Internal pipeline costs for fields and discoveries shall be included here, in addition to export pipelines. Costs related to umbilicals are included with pipelines.
The pipeline system includes the actual pipeline downstream of the connection point on the production facility and upstream of the connection point for;
Land facilities include land facilities owned by the joint venture or equivalent that are located on land downstream of the pipeline. Investments on land that are transferred free of charge to another joint venture shall be included in the investment estimate.
Other development investments comprise development investments that would not naturally be included in the other categories, including special modifications or additional equipment on existing facilities. Capex for a discovery under evaluation, related to modification on a future host installation, should also be included. This category also covers investments in specific equipment on leased production facilities.
We refer to the JOA which states what to be included in point 5.2.
The reporting regarding development wells must differentiate between wells drilled from fixed and mobile facilities.
Please note that NPD uses the term Development wells instead of Production wells (and Development Drilling, not Production drilling).
The table below shows reporting requirements for investments in development wells, ref. Item 5.3 in the JOA.
For more details, we refer to the JOA.
Please note that investments in development drilling that cannot be attributed to wells, such as seismic and associated activities mentioned above, shall be kept separate and reported separately.
New wells include all wellbores that receive their own designation in accordance with the NPD’s rules for naming wells and wellbores: Wells - Designation of wells and wellbores. For the purpose of this, a side track and each branch in a multilateral well shall count as a separate wellbore.
The number of development wells is to be reported:
The number of development wells from mobile and permanently placed facilities shall be reported.
The following definition applies:
The division is thus not determined by whether or not the facility can physically be moved.
Costs associated with development wells, disposal wells and costs related to pilot and observation wells shall be reported.
The number of wells from fixed and mobile drilling facilities shall correspond per year with costs associated with development wells. The number of wells may be reported as a decimal figure (e.g. 3.2) if the wells are not completed within the calendar year.
As part of the quality assurance, a graph in the spreadsheet “Cost Control” shows yearly investments per well, distributed on different drilling facilities, calculated from the spreadsheet “Profil_Total”.
The reporting to the RNB regarding operating costs differs on certain items from the structure in the JOA. The table below shows where this is applicable.
Table 6‑3 Operational costs
The table below shows our requirements concerning operating costs. For more details, we refer to the JOA.
As part of the quality assurance, a graph in the spreadsheet “Cost Control” shows yearly unit costs calculated from the spreadsheet “Profil_Total”.
Projects that result in significant changes in operating costs cannot be reported in the basis profile.
It is not necessary to report separate operating costs for a project on a field if no significant changes are expected in the operating costs on the facility.
If some of these projects result in extended lifetime for the field, the total operating costs must also be extended.
Costs associated with shutdown and final disposal shall be reported. The time schedule for the activity must be practically possible to carry out. In a supplementary project that can extend the lifetime of the same field, costs related to shutdown and removal/disposal may be postponed. Shutdown- and final disposal costs are then subtracted from the profile sheet for the supplementary project and added to the year(s) the removal/disposal of facility is taking place. An example is given below.
Example: A project in RC 1 is shown in the left table. The right table illustrates a supplementary project in RC 5 that can extend the lifetime of the field, thereby delaying shutdown and final disposal costs.
The table illustrates a supplementary project in RC 5 that can extend the lifetime of the field, thereby delaying shutdown and final disposal costs.
The environmental forecasts comprise the physical volumes that are flowing in the production facilities on the respective fields, both from and to own fields and connected fields, and entailing emissions to air and/or discharges to sea.
Associated fields that are included in the assumptions for environmental emissions should be listed in the cell above.
Gas received shall include all gas received or purchased for fuel, injection, resale or storage. It is insignificant whether the gas is actually used for this purpose, or whether it substitutes for gas produced from the reporting field/discovery.
Deliveries of gas are stated at actual calorific value (gross gas volume). The column shall contain all gas, including gas from associated fields, that is treated for further transport, as well as any NGL volumes that follow the gas stream. The volumes shall be referred to the metering point (fiscal) for shipping/export of gas on the facility. Gas directly injected from associated fields shall not be included in this profile.
Deliveries of oil/NGL/condensate are sales of oil/NGL/condensate (including oil/NGL/condensate that is treated from associated fields) converted into Sm³ oil equivalents (1 tonne NGL = 1.9 Sm³ oil). NGL that follows the oil stream shall be reported here. The volumes shall be referred to the metering point (fiscal) for shipping/export of gas on the facility.
Injected natural gas is the total volume of compressed natural gas for injection for pressure support and/or disposal in own or third-party fields. The gas is reported at actual calorific value. Gas volumes for use in gas lift shall not be included in this column, nor CO2 gas for disposal or pressure support.
Gas lift is the volume of gas compressed on the field for use as gas lift in own or associated fields.
Injected CO2 is the volume of CO2-gas that is injected from the field for improved recovery or for disposal in own or associated fields.
Discharge of produced water is the total volume of produced water discharged from the field, i.e. the water that comes from own field and other associated fields.
Injected water is the total volume of water (seawater and/or produced water) injected for pressure support or disposal. If a field delivers water to an installation on another field, the injection is to be reported where the pumping work actually takes place.
Natural gas for fuel is gas consumption to generate power.
Natural gas for flaring is the gas volume that is flared.
Diesel is diesel consumption from permanently placed facilities and mobile facilities that are tied in to a permanently placed facility in production (activity that is subject to the CO2 tax).
Diesel consumption that is not subject to the CO2 tax under the CO2 Tax Act shall be reported in a separate column and shall include mainly diesel consumption on mobile facilities that are involved in petroleum activity.
Emissions of CO2 and NOx from fuel gas, flaring and diesel include emissions from permanent facilities, mobile facilities linked to a permanent facility in production (activities subject to the CO2 tax) and facilities that are not covered under the CO2 Tax Act.
Emissions of CO2 as a consequence of e.g. venting from CO2 separation plants shall be reported under the column ”CO2 contribution flare”, and shall also be addressed under comments. In some cases, this will lead to a lack of consistency between the columns “natural gas to flare” and ”CO2 contribution flare”. This must be explained in the comments box.
For reserves (RC 1-3), the total CO2 and NOx emissions shall be divided between the contributions from fuel gas, flaring, diesel and activity from mobile facilities.
For RC4 and 5 it is required to report the total prognosis for emissions of CO2 and NOx, respectively. When possible please specify these emissions according to contributions from fuel, flare, diesel and activity from mobile facilities.
Activity related to exploration wells shall not be reported.
Total emissions of nmVOC and CH4 from diffuse emission sources and cold venting in connection with loading shall be reported. Emissions of natural gas from all systems that handle hydrocarbons shall be included.
The sources of these emissions will be facility-specific.
Emissions associated with storing and loading of oil/NGL/condensate shall be reported in accordance with adopted measures or as the operator has planned (in those cases where a final decision has not yet been made) to fulfil the Norwegian Environment Agency orders regarding recovery of nmVOC.
For facilities that carry out storage and loading for other fields, these volumes and their associated emissions shall also be included (applies to reserves).
Use of power from shore in the petroleum industry will have consequences for the whole power system onshore. Information regarding both energy requirements and power demand (GWh and MW) from the sector of the petroleum industry that gets power from shore is necessary both to secure an effective operation of the power system onshore, and to help plan for prudent development over time.
It is important when planning to have the best possible overview and knowledge of both energy consumption and power demand. Power demand from the onshore grid, measured as maximum load during the course of a year, from the installations that get power from shore will vary over time. This applies to both facilities that receive power from shore via subsea cables and land facilities that are directly connected to the domestic power grid. It`s the power demand that regulates the dimensioning requirement of the transmission capacity in the power grid.
For all projects/discoveries in RC 3-5, project-specific information shall be provided under the collective heading "project attributes" in the table at the top of each profile collection in the reporting file. (Please note that the project attributes are in Norwegian). This year it is possible to use the light grey cells to fill in project attributes for projects/discoveries in RC 2 but this is optional.
This information will be used in various analyses the authorities perform regarding the offshore activity. In order to ensure a uniform basis for the analysis, the project attributes are based on lists with pre-defined selections (drop-down lists). Therefore, only one value can be selected in each cell. The selections shall be reflected in the profile collection below.
For pipelines and land facilities the name of the various projects must be entered in H7 in the profile collection.
In many cases, none of the options in the respective lists will be appropriate for the specific project. The parameter that comes closest shall nevertheless be selected. An explanation can be entered in the comments space to the right in the project attributes, or a more suitable parameter can be given. The same applies if several of the choices are equally relevant; select one parameter and, if applicable, note the others in the comments space.
The comments space can also be used to provide information e.g. that realization of the project is contingent on specific assumptions, more detailed information about the use of new technology or technology development needs and explanations for the decision plan.
Use this attribute to describe the main method applied to recover the additional volumes reported with project attribute A. A drop-down list has been assigned to this column.
The table below shows available options for project category A.
Table 6‑4 Options for project category A
Development solution –use this attribute to describe the planned solution for development of resources with project category F. If multiple facilities are possible, pick the top most solution in the table below. This attribute also applies for project category A when the attribute, “further development” are selected.
More detailed information about assumed development concept can also be described using free text in the comments space in cell H28.
The table below shows the available options corresponding to project category F:
Table 6‑5 Options for project category F
Many projects will be of such a character that there will be no need to install new power intensive equipment, installed capacity to be used. This applies to both projects at the fields and development projects. In the environmental part, independent data should be reported. We ask you to state what will be the most likely requirement at project implementation. These choices are possible;
New power generating equipment (Nytt kraftgenererende utstyr).
We ask for an identification of the most obvious condition that may hinder project implementation as reported. For projects with resources in RC 4-5 the most important cause for the project not being realized or suffering significant delay is to be chosen. The table below shows the available options:
Table 6‑6 Project stoppers
Is the project based on conventional methods or will new technology be used or developed? The table below shows the available options:
Table 6‑7 Technology options
Within which areas will new technology be used or developed? Provide detailed comments in the comments space, e.g. if the project includes technology development within several areas. The table below shows the available options:
Table 6‑8 Technology areas
What is the status regarding technology development for projects that are contingent on new technology? The table below shows the available options:
Table 6‑9 Technology status
Is realization of the project time-critical, and if so, what is the time-criticality. The table below shows the available options:
Table 6‑10 Time-critical aspect
To ensure that the maturation of projects and discoveries can be followed, the authorities want an overview of the past and expected project decisions in the production licences. What kinds of decisions will be made next in the project indicates how far the project has progressed in terms of studies/evaluations. The figure below illustrates the decision model used by the authorities for larger projects and developments, and which represents some of the possible selections in the list.
Figure 6 1
The connection between project maturation and resource classes
The DG years should be consistent with the resource class for the profile. Example: volumes from wells classified as reserves according to 3.3.1 in the Guidelines, shall have DG1-DG3 when these criteria are met even though DG3 (drilling plan) for individual wells are not yet approved.